A typical assembly includes two 5.0 mm Schanz Screws, an 11.0 mm Carbon Fiber Rod, and two Adjustable Clamps.
NOTE: Finger-tighten clamps on the rod at this time and provisionally reduce the distal fragment to the reconstructed proximal fragment.
Remove the ring-locking nut and loosen the rod-locking nut on a Ring-to-Rod clamp. Note: the rod-locking nut can only be loosened, not removed.
Slide the clamp onto the rod with the rod-locking nut positioned externally for easy access.
Insert the threaded post into an accessible hole in the ring.
Replace the ring-locking nut on the threaded post and finger-tighten.
Wrench-tighten the Adjustable Clamps on the carbon fiber rod.