Removing the Threaded Conical Bolt, contd.

Jammed Threaded Conical Bolt

Click for enlarged view
Jammed Threaded Conical Bolt Jamming can occur if the short conical bolt contained in the original AO/ASIF Nailing Instrument Set is used, because the Insertion Handle cannot be used over the original conical bolts. Removal of the old-style bolts can be very difficult.

If this situation occurs, withdraw the nail approximately 5 cm. Hold the proximal nail end with the Locking Pliers and the bolt with the Combination Wrench. Use the Locking Pliers as a torque resistor while loosening the bolt. This method should be used in emergencies only.


Next Page

UNS Index