Medullary Reamer Heads

Click on images for enlarged views
Medullary Reamer Heads Medullary Reamer Heads

Twenty medullary reamer heads are available, ranging from 9.5 mm to 19.0 mm in diameter (0.5 mm increments). Medullary Reamer Heads are are always used with a flexible shaft over the 3.0 mm Reaming Rod. The head is inserted sideways into the dovetail end of the flexible shaft. The head is locked in place when it is passed over the reaming rod.

Reaming is initiated with the Flexible Shaft with 9.0 mm front-cutting reamer and progresses in 0.5 mm diameter increments. Advance the reamer with a steady, moderate pressure. Do not force the reamer. Partially retract the reamer often, to clear debris from the medullary canal. This prevents the reamer head from jamming in the medullary canal.



Next Page

UNS Index