Standard Insertion Assembly, contd.
Click on image for enlarged view
- (4) Tighten the conical bolt with the Combination Wrench or
Cannulated Socket Wrench. Do not overtighten. Mount the Locking
Nut (D) onto the conical bolt, and tighten the nut with the 4.5 mm
Pin Wrench.
- (5) Mount the Driving Head (E) onto the Curved Driving Piece (F).
Unscrew the knurled threaded sleeve until a thread end is visible. This
will allow the driving piece to be positioned over the hex head of the
conical bolt. The Curved Driving Piece must be positioned so it allows
the driving force to be transmitted parallel to the long axis of the tibia,
(i.e., parallel to the distal portion of the nail). Screw in the knurled
threaded sleeve to secure the conical bolt in the driving piece.
Next Page
UNS Index