Alternate Technique:
The Locking Bolt Measuring Device [357.113] may be used through the 11.0 mm/8.0 mm Protection Sleeve to determine locking screw length.
Remove the 8.0 mm/5.0 mm Drill Sleeve and pass the measuring hook through the 11.0 mm/ 8.0 mm Protection Sleeve. Read locking screw length directly from the measuring device at the back of the protection sleeve.
Insert a 6.0 mm Titanium Locking
Screw through the protection sleeve
Insert 6.0 mm Titanium Locking
Screws in both distal locking holes
Click on images for enlarged views
Insert the locking screw through the 11.0 mm/8.0 mm Protection Sleeve using the Hexagonal Screwdriver.
Repeat the procedure for a second distal locking screw.