Triple Trocar • For drilling and insertion of Schanz screws and Steinmann pins • In standard and short designs: 3.5 mm Trocar 110 mm [394.16] and 80 mm [394.18] 5.0 mm/3.5 mm Drill Sleeve 110 mm [393.79] and 80 mm [393.80] 6.0 mm/5.0 mm Drill Sleeve 98 mm [393.83] and 68 mm [393.84] Depth Gauge for Large External Fixator [393.78] • Decreases the need for radiographic control of Schanz screw insertion • Reduces possibility of screw over-penetration Drill Bits 3.5 mm Drill Bit, 195 mm/170mm* [310.37] 4.5 mm Drill Bit, 195 mm/170mm* [310.48] * Total length/ Effective length